Product Description

APPLICATION :

• Chemical plants,Dairies/Food/Drinks Processing plants
• Spas-Jacuzzis ,Hospitals,medical,veterinary surgeries.
• Industrial plants,Kitchens Commercial & Domestic
• Shopping Malls/Super market
• Restaurants,Service Station/Workshop/swimming pools.

ADVANTAGES :

• Highly durable & strength.
• Dirt , Fungus and bacteria free Tile Joints.
• Strong bond with tile.
• Acid, chemical resistance, Waterproof.
• Easy to clean & install.
• Uniform in shade.
• Hygienic, Stain free, Non- Cracking

PACKING COMPONENTS:

Rakshak EpoRes is a factory proportioned kit with Resin ( Part A), Hardener ( Part B), and Filler powder (Part C).

Use Before 24 months, If stored at Temprature >32O F(000 ℃) and < 110O F( 430 ℃)

WORKING PROPERTIES:

Pot life : 45 min.
Foot Traffic : 24 hrs.
Heavy Traffic : 72 hrs.
Specification Subject to change without notification results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site condition.

SURFACE PREPARATION:

Before starting to grout , the tile surface should be dust and dirt free. Do not clean tile with acid cleaners.
Mixing :Empty entire contents of Rakshak Epoxy Grout Part “A’’ and part “ B” jars into a clean pall. Mix with a margin trowel or a slow speed drill mixer until liquid are completely blended. Add at least 3/4 of grout part “C” Filler powder and mix to a uniform consistency.
Application :Immediately pour contents of bucket into working area. Be sure all grout joints are packed full. Remove excess material as possible before initial cleaning with grout float. Do not leave excess grout on the face of tile.
Initially Cleaning :After 30-45 min of the application of epoxy grout scrub the surface of the tile and joint with clean water and
scrubber provided to remove any excess grout. Then take a clean thick towel and drag across the tile to remove any residue.
Final Cleaning :With in 24 hrs do a second cleaning with normal soap detergent to remove any haze from the tile.