Product Description
Advabtages :
- Highly durable & strength.
- Dirt , Fungus and bacteria freeTile Joints.
- Strong bond with tile.
- Acid, chemical resistance, Waterproof.
- Easy to clean & install.
- Uniform in shade.
- Hygienic, Stain free, Non- Crackin
Packing Components :
Rakshak EpoRes is a factory proportioned kit with Resin (Part A), Hardener ( Part B), and Filler powder (Part C).
| UNIT | Net Wt. |
|
Resin 200 grm+Hardener 100grm+ Filler 700 grm |
= 1.0 kgs Set |
|
Resin 1.0kg + Hardener 500grm + Filler 3.5 kgs |
= 5.0 kgs Set |
Working Properties :
Pot life : 45 min.
Foot Traffic : 24 hrs.
Heavy Traffic : 72 hrs.
Specification Subject to change without notification results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site condition.
Surface Preparation :
Before starting to grout , the tile surface should be dust and dirt free. Do not clean tile with acid cleaners.
Before starting to grout , the tile surface should be dust and dirt free. Do not clean tile with acid cleaners.
Mixing :
Empty entire contents of Rakshak Epoxy Grout Part “A’’and part “ B” jars into a clean pall. Mix with a margin trowel or a slow speed drill mixer until liquid are completely blended. Add at least 3/4 of grout part “C”
Filler powder and mix to a uniform consistency.
Application :
Immediately pour contents of bucket into working area. Be sure all grout joints are packed full. Remove excess material as possible before initial cleaning with grout float. Do not leave excess grout on the face of tile.
Initially Cleaning :
After 30-45 min of the application of epoxy grout scrub the surface of the tile and joint with clean water and scrubber provided to remove any excess grout. Then take a clean thick towel and drag across the tile to remove any residue.
Final Cleaning :
With in 24 hrs do a second cleaning with normal soap detergent to remove any haze from the tile.
